Programming Instructions:
Note: This is the same for many GM vehicles.
Sit in the car’s driver’s seat.Turn the key off. Open the driver’s side fuse panel and take out the fuse marked “Radio.” Turn the key to on, and then back off, and then to on again. Do this within a five second window. You’ll hear the car’s doors lock and unlock.
Push and hold “Lock” and “Unlock” for 15 to 20 seconds, until the door locks sound again. Now the remote is programmed. Turn the key off and replace the “Radio” fuse.
Ever says
I tried doing this step by step but my car doesn’t do anything when I take the fuse out and turn the key to the on position and off position within five seconds.
I tried it over and over as directed and other ways. What could be the problem?