Programming Instructions:
Note: This is the same for many GM vehicles.
Sit in the car’s driver’s seat. Insert the key and turn it ON. Push the INFORMATION button on the information center until the display reads PRESS TO RELEARN KEYS. Push the CHECK button. Push and hold LOCK and UNLOCK on the remote. Wait about 15 seconds or so. You’ll hear the horn chirp. The remote is programmed. Repeat for the additional remotes you need to program; you can program up to 8.
Henry A. Simpson says
I tried the above procedure on my 2010 Camaro ss and I never got the message PRESS TO RELEARN KEYS when pushing the INFORMATION button. Does the vehicle need to be cranked or just turned to the ON position? My keys work fine, it just the remote that does not work. I replaced the battery because I thought it might be dead. Same result. Remote will not program. Any assistance you could give me would be greatly appreciated.
Donnie says
I have the same problem with my 2010 Camaro SS. Please help.
Laimont Lynch says
I have a spare key/fob for my 2015 Camaro 2ss. The key will not turn when in the ignition, and the fob buttons do not lock/unlock the doors. Please assist.