Programming Instructions:
Note: This is the same for many GM vehicles.
Sit in the car’s driver’s seat. Insert the key and turn it ON. Push the INFORMATION button on the information center until the display reads PRESS TO RELEARN KEYS. Push the CHECK button. Push and hold LOCK and UNLOCK on the remote. Wait about 15 seconds or so. You’ll hear the horn chirp. The remote is programmed. Repeat for the additional remotes you need to program; you can program up to 8.
Dan says
Thanks, worked like a charm.
Jessica says
I just used this and it worked perfectly with my new key fobs thank you soo much!!!!!!
Rosalyn dukes says
Do both remotes need to be coded at the same time?
Z says
Rosalyn Dukes….Yes they do..just hold both remote buttons down at the same time for the 15 seconds and it should work, it was the only way it would work for mine.