Programming Instructions:
Note: This is the same for many GM vehicles.
Sit in the car’s driver’s seat. Insert the key and turn it ON. Push the INFORMATION button on the information center until the display reads PRESS TO RELEARN KEYS. Push the CHECK button. Push and hold LOCK and UNLOCK on the remote. Wait about 15 seconds or so. You’ll hear the horn chirp. The remote is programmed. Repeat for the additional remotes you need to program; you can program up to 8.
heinz servcie auto c says
how do you reprogram a new remote lock key pad. please let me know since we just brought one and need instructing
Robert says
Are you going to update this info to the same take it to the dealer or a locksmith like you have for all other year HHR’s? The 07 is no different then the other years.
M ick says
It doesn’t work, what is my next step?
Greg says
Buy the Dorman one from Autozone for $59.95; it comes with a OBD II programming tool. Return it after you program your remotes.
johnny says
How to program remote control for a 2007 Chevrolet hhr?
Steve says
How do I program my factory remote 2006 Chevrolet H HR with autostart and autostart does not work thank you
jim schaser says
i have read the instructions. There is not a “press to relearn keys” on the information panel.
Larraine says
There is no display ” Press to Relearn Key” nor is there an odometer reset knob. This means it will force me to pay a dealer….?
David says
This is a lie. You knew it was a lie when you posted it. This is the kind of shit that makes people crazy. If you can’t be accurate, if you can’t be verifiable, if you just don’t know how to tell the truth, then your license to post shit should be taken away. Your credibility is for shit.
Lorrain says
yes yes yes. People will post ANYTHING on the internet w/o ACCURACY or VERIFICATION. Finally David, somebody who feels the same way I do…ugh
Thomas Wilkie says
tommyscman@yahoo.com
Ramon Blecher says
2007 (HHR) my key remote won’t work at all I have two and the BATTS are strong the horn device won’t work either. The INFO system does not have a press to relearn key so where do go from there???? Now all I wont to do is have the key remote to operate like it did some time ago!
Gene says
2008 HHR. I bought new key fobs from Amazon. Took them to auto-zone, the key fobs they sell come with something that plugs into your OBD port in your car. I asked them to try it on mine and it worked. Turn the car to run plug the device into the OBD it will beep press and hold lock an unlock on fob until it beeps, make sure you program all your fobs at the same time.
Jodi Stilson says
Yes I did the same thing took them to autozone and talked them into plugging in the device that comes with the remotes they sell and it worked for the lock and unlock but the remote start did not I will do it again later with a device I will buy from autozone
Stan says
I fixed mine with a couple small circles of heavy duty aluminum foil. Put them on top of the little humps in the rubber with a drop of glue. Works fine now.