Programming Instructions:
Note: This is the same for many GM vehicles.
Sit in the car’s driver’s seat. Insert the key and turn it ON. Push the INFORMATION button on the information center until the display reads PRESS TO RELEARN KEYS. Push the CHECK button. Push and hold LOCK and UNLOCK on the remote. Wait about 15 seconds or so. You’ll hear the horn chirp. The remote is programmed. Repeat for the additional remotes you need to program; you can program up to 8.
Mark Stephen Douglas says
How do you program a remote for 2011 Chevy Impala?
The Remote Guy says
Hi Mark, I don’t have this one on record at the moment and am unable to locate a service manual yet to find out. I will post back here if I find instructions.
Maurice says
Hi Mark, How do you program a keyless remote for a 2011 chevy impala Lt
Mark Buckner says
How do you program the remote and key for a 2011 Impala?
Ghorm says
How I can program remote for caprice 2014 stander for medial east
dave says
how do I program a remote for 2015 impala ltz limited
bill says
How do I program a remote for a 2015 Impala Limited LS Fleet edition model.
Carlos says
I tried programming a key fob as instructions indicated for a 2010 impala but no results. What else can I do?
Brian says
I get to the press to relearn remote key then I press the check mark and nothing happens. Is there something wrong?