Programming Instructions: Note: This is the same for many Chrysler/Dodge/Jeep vehicles.
Grab your working remote. Push the LOCK button five times, allowing exactly two seconds to pass between each press of the LOCK button. Insert the ignition key and turn it to RUN. Push and hold UNLOCK on the working remote for 6 seconds. Push and hold PANIC for one second while continuing to hold UNLOCK. Release both buttons at the same time.
Push any button on the remote to program it. Then push any button on the remote that was already programmed. It has to be reprogrammed. The remote is now programmed to the vehicle. Turn the key to OFF.
Brian says
Hello,
Am I missing something here?
I can’t get this to work to program the second key I bought.
Have these steps worked for anyone and if so, can you better explain how?
Thank you
Tom says
i only key one key with a transponder chip . Bought two remote keys and can not unlock or lock doors with it . Try several ways from web sites . The chip is out of original and I put it next to ignition switch the Jeep Grand Cherokee starts with the. New remote key , but won’t lock doors when pushed . What should I do?