Programming Instructions: Note: This is the same for many Chrysler/Dodge/Jeep vehicles.
Grab your working remote. Insert the ignition key and turn it to ON. Push and hold UNLOCK on the working remote for 6 seconds. Push and hold PANIC for one second while continuing to hold UNLOCK. Release both buttons at the same time.
Push any button on the remote to program it. Then push any button on the remote that was already programmed. It has to be reprogrammed. The remote is now programmed to the vehicle. Turn the key to OFF.
Tommy Bradley says
Somewhere in the my programming of my 2003 Jeep liberty, I made an error. I followed your instructions for programming a keyless remote but now, the original remote is not functioning. What do I need to do, to reactivate the original remote?
Tommy
The Remote Guy says
Hello Tommy. Entering programming mode wipes the previously programmed remote(s). Before turning the key to “Off” at the end of the procedure, push any button on the other remote. This re-syncs it. Take care.
Dex says
is there any way to program a fob if you don’t have a working one