Programming Instructions: Note: The programming procedure is identical for many Ford, Lincoln, and Mercury vehicles, as well as for the Mazda Tribute and Mazda B-Series truck.
Sit in the truck’s driver’s seat. Put the key in the ignition. Turn the key from OFF to RUN at least 8 times within a 10 second window. NOTE: You must do this very quickly for it to work. If successful, you’ll hear the doors lock and unlock. This lets you know the system is ready to accept the remote. Push any button on the remote. The door locks will lock and unlock. The remote is programmed.
paul says
Can this also work for gallaxy and Windstar?
GLENN says
Tried this with my 2009 Ford Ranger. Everything worked as stated above, including hearing the door locks cycle at the end, confirming I was then out of programming mode. Key FOB will still not work.