Learn to program the remote to your 2009 Toyota Camry without any help from the dealer. This includes the XLS model
Programming Instructions: Note: This is the same for many Toyota vehicles.
Remove the key from the ignition. Lock all of the doors, but open the driver’s side door. Leave it unlocked. Insert the key into the ignition twice within five seconds. Don’t turn it. Close then open the door twice. Insert the key again then remove it from the ignition.
Close then open the driver’s side door. Close then open the driver’s side door again. Insert the key. Leave it in the ignition. Close the door. Turn the key to “On,” without starting the engine, and then turn it off. Remove the key. You’ll hear the door locks sound.
Push and hold “Lock” and “Unlock” buttons on the remote for two seconds, and then release the buttons. Then push and hold “Lock” for three seconds. The remote is now programmed.
I tried all the combinations I found and none seem to work for my car. I have a 2009 Camry and I got the key cut and the chip programmed but the locksmith guy could not programs the remote on the key. Is there any other combination the I can try to programs the remote on the key?
I am having the same issue. Car won’t go into program mode, even used a stopwatch to make sure I was within the time frame. 🙁
Same problem with me. I tried it dozens of time and even tried using the ECU software that I SUCCESSFULLY programmed the transponder chip with, yet it can’t seem to program the remote.