Learn to program the remote to your 2000 Toyota Corolla without any help from the dealer. This includes the XLS model.
Programming Instructions: Note: This is the same for many Toyota vehicles.
Remove the key from the ignition. Lock all of the doors, but open the driver’s side door. Leave it unlocked. Insert the key into the ignition twice within five seconds. Don’t turn it. Close then open the door twice. Insert the key again then remove it from the ignition.
Close then open the driver’s side door. Close then open the driver’s side door again. Insert the key. Leave it in the ignition. Close the door. Turn the key to “On,” without starting the engine, and then turn it off. Remove the key. You’ll hear the door locks sound.
Push and hold “Lock” and “Unlock” buttons on the remote for two seconds, and then release the buttons. Then push and hold “Lock” for three seconds. The remote is now programmed.
Brian says
I have tried at least 30 times to program my remote for the 2000 Corolla I’ve done your steps to the T even watch the videos and done make zactly like they do them and the car will not cycle into the unlock lock on the door locks for program mode is there another way?