Learn to program the remote to your 2002 Toyota Tundra without any help from the dealer. This includes the XLS model.
Programming Instructions: Note: This is the same for many Toyota vehicles.
Remove the key from the ignition. Lock all of the doors, but open the driver’s side door. Leave it unlocked. Insert the key into the ignition twice within five seconds. Don’t turn it. Close then open the door twice. Insert the key again then remove it from the ignition.
Close then open the driver’s side door. Close then open the driver’s side door again. Insert the key. Leave it in the ignition. Close the door. Turn the key to “On,” without starting the engine, and then turn it off. Remove the key. You’ll hear the door locks sound.
Push and hold “Lock” and “Unlock” buttons on the remote for two seconds, and then release the buttons. Then push and hold “Lock” for three seconds. The remote is now programmed.
Rick Dullanty says
I have 2002 Tundra. I followed the instructions multiple times. It would not go into programming mode. HELP
Tom Bell says
Same issue with My 02 Tundra, Can find no instructions on re-program of key fob. My system is not an RS3000. It is called “Power Door Lock Control System”. My fob which is a Toyota fob has 2 buttons but only 1 comes functional. There is no separate Lock and Unlock buttons. One functional button is a toggle Lock/Unlock. Any help would be greatly appreciated!