Programming Instructions:
Note: Programming the remote is the same or similar for many Acura and Honda vehicles.
Sit in the Acura’s driver’s seat. Turn the key to position “2.” Push LOCK on the remote you plan on programming. Turn the key to position “0.” Turn the key back to position “2.”
Repeat the above procedure four more times. Push LOCK on the same remote. The door locks now cycle. Push LOCK on the remote. Push LOCK on any other remotes you want to program. If you already had a remote programmed, and are programming an extra, push LOCK on it as well — it must be reprogrammed. Turn the key to position 0 and remove it to finish.
Henry says
big thanks it works.
The Remote Guy says
Great news – glad to hear it 🙂
Dan Neveux says
so this procedure works for a 2006 cr-v correct? just checking..
The Remote Guy says
sorry for the typo in the instructions above, Honda uses the same instructions for several models. Yes this works for CRV. I will update accordingly !
Dan Neveux says
do you happen to know if there is a way to program the key by chance?
Dan Neveux says
THANKS SO MUCH