Programming Instructions:
Note: This is the same for many Chrysler/Dodge/Jeep vehicles.
Grab your working remote. Insert the ignition key and turn it to ON. Push and hold UNLOCK on the working remote for 6 seconds. Push and hold PANIC for one second while continuing to hold UNLOCK. Release both buttons at the same time.
Push any button on the remote to program it. Then push any button on the remote that was already programmed. It has to be reprogrammed. The remote is now programmed to the vehicle. Turn the key to OFF.
Matthew Page says
Hi,
I’m trying to program a remote fob for a 2003 Chrysler PT Cruiser, but whilst your instructions say to press the UNLOCK button and then the PANIC button, my fob doesn’t have a PANIC button, only UNLOCK and LOCK. Any ideas on what to do?
Matt