Learn to program the remote to your 2007 Pontiac Grand Prix without any help from the dealer. This includes the Grand Prix GT model.
Programming Instructions: Note: This is the same for many GM vehicles.
Sit in the driver’s seat. Take the key out. Open the interior fuse box panel. Inspect the fuses to find “Mall Pgm.” Pull the fuse out. Close the door and sit inside. Turn the ignition key to “Acc.” Turn it off. Turn it back to “Acc.” Open the driver’s door. Close the driver’s door. You’ll hear a beep. Push and hold “Lock” and “Unlock” together for 17 seconds to program the remote.
DENISE GOODWIN says
during this process it was never stated if you should replace the mall pgm fuse or not so im stuck here right now not knowing what to do!!!!!
The Remote Guy says
Hello. Replace the Mall PGM fuse when you’re finished.
Candace says
My 2007 Pontiac GP, fuse block is not labeled “mall pgm”. I have found one labeled “rfa/mod”-remote function activator(remote keyless entry) and another labeled “dr lk/ trunk”-door lock/trunk. Would I remove the remote fuse and/or the trunk door fuse? Thanks for your help, Candace
meechie carlito says
How do I program my 2007 replacement key remote
Joe says
I don’t have a pgm fuse. I only have pcm fuses. There are two of them. What do I do???
Larry says
my daughters car don’t have this mall fuse so what fuse do I locate or look for to remove to program new remotes get back to me ty