Learn to program the remote to your 2006 Toyota RAV4 without any help from the dealer.
Programming Instructions: Note: This is the same for many Toyota vehicles.
Remove the key from the ignition. Lock all of the doors, but open the driver’s side door. Leave it unlocked. Insert the key into the ignition twice within five seconds. Don’t turn it. Close then open the door twice. Insert the key again then remove it from the ignition.
Close then open the driver’s side door. Close then open the driver’s side door again. Insert the key. Leave it in the ignition. Close the door. Turn the key to “On,” without starting the engine, and then turn it off. Remove the key. You’ll hear the door locks sound.
Push and hold “Lock” and “Unlock” buttons on the remote for two seconds, and then release the buttons. Then push and hold “Lock” for three seconds. The remote is now programmed.
Leave a Reply