Programming Instructions: [smartads]
Turn the Lesabre’s key to OFF. Leave it in the ignition. Open the driver’s door. Find the OBD data port on the left side of the dash, beneath the steering wheel. Insert a jumper pin into pins 8 and 4. The doors will lock and unlock. Close the driver’s door. Turn the ignition key to ON. Wait a few seconds, and then push and hold LOCK and UNLOCK on the key fob you are programming. Wait for the doors to unlock and lock. This takes about a minute. The remote is programmed.
2004 Buick LeSabre program remote. This car I have is American made and when I go to jump pind 4 & 8 there are not pins in both of these locations. Any alternatives? Thanks
my obd2 #4 pin has no terminal
How did you ever get it programmed
My 2004 LeSabre has a metal connection in pin 4 but no metal connection in pin 8. Now how do I program my new keyless entry?
My LeSabre has a metal connection in pin #4 but no metal contact in position #8. Any other advice?