Programming Instructions:
Note: This is the same for many GM vehicles.
Sit in the car’s driver’s seat. Insert the key and turn it ON. Push the INFORMATION button on the information center until the display reads PRESS TO RELEARN KEYS. Push the CHECK button. Push and hold LOCK and UNLOCK on the remote. Wait about 15 seconds or so. You’ll hear the horn chirp. The remote is programmed. Repeat for the additional remotes you need to program; you can program up to 8.
Where the heck is the information button I have 2006 equinox ls and no clue where the information button is
Resynchronization
This is used to keep the transmitter of the vehicle
communicating with the receiver of the vehicle.
Resynchronization may be required due to the security
method used by this system.
Your vehicle has an automatic resynchronization
function built into the system. If your transmitter is
not working properly and you have to manually
resynchronize, press the lock and unlock buttons at the
same time for seven seconds while you are near
your vehicle. The doors will lock or unlock, depending
on their starting position. If they do not, contact
your dealer for service.
Same here, need a video or at least pics. They are very vague on instructions.
I cannot find am information button either on my 06 Equinox. Can anyone help?
How to reprogram chevy equinox 2006 vehicles computer system. Can we use flash to reprogram?kindly submitted for your clarifications pls.
Pleas show pictures of the reprogramming button
cannot find am information button either on my 06 Equinox. Can anyone help?
.can not reprog new remote
Why has he not answered your questions? There is not an “information button” on the 2006 model, so does he know how to program without this button visible in an 2006? I don’t think he was sitting in a 2006 model…